Requirements and different uses of automobile nylon 66 cable ties?
Automobile nylon 66 cable ties must maintain two characteristics to work normally all year round
These two features are resistance to turbulence and high temperature, which are closely related to the working state of the car. We know that during the operation of the car, the engine generates heat, and this heat will be dissipated to the surrounding space through the heat sink Therefore, as the strapping parts of many lines and tubes of automobiles, automobile cable ties must be able to withstand higher temperatures and have greater anti-bumping ability.
There are many materials for the style of car ties, but they are more uniform.
In order to adapt to the compact structure design of the car, there are many places inside the car integrated system that need to use car ties. There may be as many as a dozen types of car ties used in the same car. Under the circumstance, the variable and adjustable automobile cable tie mold is very economical. For product molds of millions and tens of millions, if one mold can produce multiple products, it will undoubtedly greatly help the company reduce cost.
One of the very important reasons why products such as automobile cable ties are difficult to qualify is that such products are often fine micro-end sheets at the head end. The shape of this product is difficult to process. Nylon cable ties are often set to shrink rate.
There are many kinds of car ties all over the car.
Most automobile cable ties are of plastic type. This kind of cable ties is usually used in the various integrated wiring harness parts of the car. One is to organize and the other is to fasten the connection. Under these two functions It is possible to connect all the components of the car into a tight whole.
The requirements of automobile operating conditions on automobile cable ties.
The car engine emits a lot of heat during the working process. Usually the temperature under the casing is quite high. Therefore, the car cable tie is required to have the ability to resist high temperatures. In addition, the car will encounter it on any road, so in many cases , The tensile strength of the car cable tie must be high, so as to ensure that the components will not loosen during operation and ensure driving safety.
The same ubiquitous stainless steel car cable tie.
Although plastic car ties are the most widely used in cars, stainless steel car ties are also found everywhere in the car's interior parts, such as the strapping parts of exhaust pipes. Previously, welding methods were usually used, neither It is durable and not cheap. When car ties are used, this problem should not be completely solved.
We know that the sealing and dustproof requirements of the car drive shaft box of the cable tie are very high, and the usual fasteners cannot achieve absolute sealing. This requires the use of automotive cable ties. The stainless steel cable ties make it both tight It can also reduce production costs.
One is that the cable ties produced cannot be buckled and cannot be inserted into the cable tie holes. This type of problem is mostly caused by the short stroke of the front buckle, moving during perforation, or the position of the back buckle groove not matching the cable tie hole. This kind of problem can be solved by increasing the front buckle stroke or adjusting the position of the back buckle groove and the tie hole. The second is that the tie is not tightly tied, mostly due to the short stroke of the card slot, which can be appropriately extended to solve it. The stop rod does not come out and is easy to be stuck. It may be caused by lack of lubricant or damage to the stop rod electromagnet spring. The problem can be solved by adding lubricant or replacing the spring.
